Audio technica AT2035-Studio

Name: AT2035-Studio
Brand: Audio technica
SKU: 75468
Availability: SoldOut
Rating: 5 (1 reviews)

Bewertungen lesen (1)
Zugehöriges Zubehör
Ähnliche Produkte

VIDEO

Dieser Artikel ist nicht mehr zum Verkauf verfügbar.

Nicht verfügbar

kontaktieren Sie uns

Lagerbestand

Nicht im Geschäft erhältlich

Die Marke Audio technica

Erfahren Sie mehr über die Marke Audio technica und entdecken Sie den gesamten Katalog.

Entdecken

Das größte Filialnetz in Frankreich

Hier finden Sie alle Informationen zu unseren Superstores und unseren Fachboutiquen.

Finde mehr heraus

Wenden Sie sich an einen Experten

Unsere musikbegeisterten und begeisterten Teleberater sind hier, um alle Ihre Fragen zu beantworten.

+33 181 930 900 email

Home studio set

Home studio set AUDIO TECHNICA At2035-studio.

Technisches Arbeitsblatt

AT2035
Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Includes custom shock mount & protective pouch
Frequency response 20Hz - 20kHz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
Impedance 120 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio 82 dB, 1 kHz at 1 Pa
ATH-M40X
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: CCAW (Copper-clad aluminum wire)
Frequency Response: 15 - 24,000 Hz
Max Input Power: 1,600 mW @ 1KHz
Sensitivity: 96 dB
Impedance: 35 ohms
Folding/collapsible: Yes
Weight: (Without cable) 8.5 oz (240 g)
Cable
Detachable: Yes
Cable Includes: 1.2m-3m coiled, 3m straight cables
Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
Accessories included: Screw-on 1/4” adapter, pouch
Audient iD4
2 channels USB audio interface
MICROPHONE PREAMPLIFIER:
MIC GAIN: 0 to 58 dB
LINE GAIN: -10 to 48 dB (-10dB hardwired line pad)
PHANTOM POWER: 48V ±4V @ 10mA/Channel
MIC EIN: <-126.0 dBu
CMRR: >75 dB @ 1kHz
MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum)
INPUT IMPEDANCE (Mic): 2.8 kΩ Balanced
INPUT IMPEDANCE (Line): >8kΩ Balanced
FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain
CROSSTALK: <-91 dBu
THD+N @ 0dBu (1kHz): 0.0015% (-96.5dBu)
SNR: 96 dB un-weighted, 99 dB A-weighted
XLR Combi Female Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) 1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)

Weitere Spezifikationen

Weniger Spezifikationen

Erfahrungsberichte : 1 Notiz

5,0 5

stdClass Object
(
    [noteCount] => 1
    [globalNote] => 5.0
    [detailNote1] => stdClass Object
        (
            [question1] => 
            [note1] => 
        )

    [detailNote2] => stdClass Object
        (
            [question2] => 
            [note2] => 
        )

    [detailNote3] => stdClass Object
        (
            [question3] => 
            [note3] => 
        )

    [detailNote4] => stdClass Object
        (
            [question4] => 
            [note4] => 
        )

    [detailNote5] => stdClass Object
        (
            [question5] => 
            [note5] => 
        )

)

Eine Rezension hinterlassen